This article will discuss how calcium can clog a seepage pit. Any complete system cannot function without its parts. Each part has a designated function that fits into the overall design. Anything that goes wrong with any of its parts will cause it to malfunction. That is why some helpful components are added into the system. These add-ons make sure that the system works well even of some of the fixed elements have problems. Your septic is one of the systems that have fixed components such as the septic tank and the drain field. To make the septic system live longer and function better, the seepage pit is installed. The seepage pit is basically a hole in the ground that only received liquids from the septic tank. The goal of the seepage pit is to purify the pre-treated effluent before it is dispersed into the surrounding soil absorption system. The seepage pit has biomat that is regulated by the aerobic bacteria. Biomat rid the effluent of pathogens and toxins before it is released into the surrounding environment and be reused again.
Because the seepage pit is part of the septic system, it is also prone to clogging. One cause of seepage pit clogging is soil compaction. This happens when the septic system area is made into a storage facility, driveway, or parking lot. The heavy weight compresses the seepage pit components. The crushing lets in debris and excess water, which inhibits the normal flow of the wastewater treatment. You should remove the obstacles over the septic system so that the seepage pit may be left alone to do its job. High-level water load is also a cause for seepage pit clogging. When there is a lot of water entering the system, the solid waste particles are stirred up. Their deterioration is not done efficiently. The solid waste products are just left in the system to clog the tank. They are then pushed into the seepage pit to clog it. You should make sure that you do not use your washing machine and dishwasher at the same time. You should also divert the gutter drainage away from the septic area to avoid excess water load.
Another cause for seepage pit clogging is the use of harsh acids and bases. It is not advisable to use these compounds in your home because they kill off the resident bacteria in the system. Without bacteria, there can be no wastewater treatment. As a result, the solid waste particles are left to accumulate in the tank and then pushed into the seepage pit to clog it. Opt for environment friendly cleaners that do the job without causing harm to the septic or the environment. Invasive roots are also causes for the seepage pit to clog. They search for a regular source of water and nutrients. The closest source they have is your septic system. Once they enter the system, they enter the seepage pit and stop it from doing its special job. You should make sure that higher hardwood plants are not placed near the septic system and your seepage pit.
Also determine how calcium can clog a seepage pit. Calcium sulfoaluminate or ettringite is the worst sign of septic deterioration. The thiocillus bacteria perform anaerobic digestion. Hydrogen sulfide is produced in this process. The gas accumulates in the headspace above the wastewater line and interacts with oxygen. Here is when sulfuric acid appears. The acid forms the ettringite on the concrete reinforcement of the septic system. The concrete corrodes and exposes the metal components of the septic. The damage allows entrance of the debris and excess water into the seepage pit. You could ask your septic expert to help by installing an aeration system. This system will increase the amount of oxygen that enters the septic. It will significantly decrease the amount of hydrogen sulfide above the waterline. This will definitely lessen the damage brought about by sulfuric acid. Ultimately, you will have a septic system for years to come.
